Product

Power Monitoring Devices PAC3100 The Low Budget Device for Digital Measurement

With SENTRON PAC3100 it’s quick and easy to get started with digital measuring systems. Our entry model supplies you with more than 30 measured values on energy consumption and basic electrical variables, dispensing with the need for a multitude of individual analog measuring instruments. Thanks to its integrated communication interface and its digital inputs and outputs, flexible system integration and adjustments in the plant are always possible with SENTRON PAC3100.

Advantages at a glance

  • Simple operation intuitive user prompting, multi-language plain text displays
  • Fast assembly fast, snap-in supports, assembly also possible without tools
  • Integrated communication option RS485 interface with open protocol (Modbus RTU)
  • Flexible adjustments to suit application Switch integration and pulse output via 2 digital inputs (internal power supply) and 2 digital outputs
  • Wide range of use large scope of functions and services, e.g. measurement in 50 und 60 Hz supplies, use in plants with UL/CSA requirements, IP65 through use of standard seals
  • Low space requirements compact design: 96x96x56 mm / 3.8×3.8×2.2″ (WxHxD), mounting depth: 51 mm / 2″
  • Transparent power distribution Start-to-finish detection of energy consumption and basic electrical variables
  • Good readability even in difficult light conditions large, illuminated graphic LC display

Power Monitoring Devices PAC3200 The Basis for Reliable and Precise Measurements

When, where, and how much energy is used – transparent information is provided by the new SENTRON PAC3200 Power Monitoring Device. This device can be used wherever electrical energy is distributed. SENTRON PAC3200 records more than 50 electrical parameters such as voltage, current, powers, energy values, frequency, power factor and asymmetry. The compact control panel instrument supplies basic data which will give you an overview of where electricity is consumed and where energy flows in the electrical system.

Advantages at a glance

  • Wide range of use large scope of functions and services, e.g. measurement in 50 und 60 Hz supplies, use in plants with UL/CSA requirements, IP65 through use of standard seals
  • Low space requirements compact design: 96x96x56 mm (WxHxD), mounting depth: 51 mm or 73 mm with expansion module
  • Exact allocation of costs high measuring accuracy for energy, class 0.5S in accordance with IEC62053-22 for active energy
  • Good readability even under poor lighting conditions large, illuminated graphics LC display
  • Simple operation intuitive user prompting, multi-language text displays •Fast assembly fast, snap-in supports, assembly also possible without tools
  • Comprehensive recording of consumption 10 energy meters for active energy, reactive energy and apparent energy, high and low tariffs, import and export
  • A variety of communication options Integration into every power management system or automation      system via Ethernet, PROFIBUS DP or ModbusRTU

Power Monitoring Devices PAC4200 The Basis for Reliable and Precise Measurements

When, where, and how much energy is used – transparent information is provided by the new SENTRON PAC3200 Power Monitoring Device. This device can be used wherever electrical energy is distributed. SENTRON PAC3200 records more than 50 electrical parameters such as voltage, current, powers, energy values, frequency, power factor and asymmetry. The compact control panel instrument supplies basic data which will give you an overview of where electricity is consumed and where energy flows in the electrical system.

Advantages at a glance

  • Wide range of use large scope of functions and services, e.g. measurement in 50 und 60 Hz supplies, use in plants with UL/CSA requirements, IP65 through use of standard seals
  • Low space requirements compact design: 96x96x56 mm (WxHxD), mounting depth: 51 mm or 73 mm with expansion module
  • Exact allocation of costs high measuring accuracy for energy, class 0.5S in accordance with IEC62053-22 for active energy
  • Good readability even under poor lighting conditions large, illuminated graphics LC display
  • Simple operation intuitive user prompting, multi-language text displays •Fast assembly fast, snap-in supports, assembly also possible without tools
  • Comprehensive recording of consumption 10 energy meters for active energy, reactive energy and apparent energy, high and low tariffs, import and export
  • A variety of communication options Integration into every power management system or automation system via Ethernet, PROFIBUS DP or ModbusRTU

Low Voltage

3WL Air Circuit Breakers

  • Rated currents : 630 A to 6300 A
  • 3 size for different rated current ranges
  • 3 and 4-pole versions
  • Rated operational voltage up to AC 690 V and 1000 V. Special version up to AC 1000 V available
  • 3 different switching capacity classes in the range from 50 kA to 100 kA for AC applications and one switching capacity class for DC applications.

3VL Molded Case Circuit Breakers

  • Used as incoming and outgoing circuit-breakers for line protection
  • Available with very hing switch capacity L : 100 kA at 380/415 VAC
  • Available for ETU/LCD (display) ETU
  • Interchangeability (upgradeable): (TM=>ETU=>LCD ETU)
  • Ampere rating Range at 50 °C Ambient Temperature • Comply with IEC 60947-2,EN 60947-1

3RV Motor Circuit Breakers

3RV Circuit Breakers are Compact, Current –limiting circuit-breaker which are optimized for load feeders. The circuit-breakers are use for switch and protecting three-phase induction motors of up to 34 kW at AC 400 V and for loads with rated currents of up to 100A.

3RW Soft Starters

  • Soft starting with voltage ramp ; the setting range of the starting voltage Us is sufficient between 40% to 100% and ramp time tR can be set from 0 s to 20 s
  • Controlled shutdown with voltage ramps;the shut-down ramp time off can be varied between 0 s to 20 s
  • Setting with 3 potentiometers, simple installation and startup
  • System voltages from 200 to 460 V, 50/60 Hz
  • Two control voltage designs for 24V AC/DC and 110 to 230 V AC/DC • Wide temperature range :-25 to 60 °C

3RP Solid-state Time Relays

DIN rail screw mounting

  • Accuracy setting 5% Repeat accuracy V 1%
  • Switching &voltage LED
  • AC – 15 at 240V = 3A
  • DC – 1324V = 1A , 48V = 0.45A , 60V = 0.35A , 110V = 0.2A , 230V = 0.1A

Contactor Relays

 All relays can be fitted to 35 mm. DIN rail without using tools

  • For screw and DIN rail mounting
  • Snap-on auxiliaries and accessories
  • Rated operational current at //AC-15/ AC-14 , 230V=6A , 400V=3A , 500V=2A , 690V=1A

3RB Overload Relays

 For mounting onto contactor and for installing as a single unit with adaptor

  • Auxiliary contacts 1 NO + 1 NC, manual/automatic RESET
  • Switch position indicator , STOP button and TEST function
  • Manual /automatic RESET , switch position indicator
  • Phase failure and phase unbalance sensitivity
  • For normal or heavy duty starting
  • Over current , phase unbalance , phase failure sensitivity, locked rotor and thermistor protection
  • Optional ground fault protection with separate core balance current transformer
  • Tripping CLASS 5/10/15/20/25/30 adjustable
  • Manual/Automatic/Remote RESET Y1/Y2
  • 3 LED indicators (“ready” , ”ground fault” , “over load” )
  • Combined TEST/RESET pushbutton with TEST function test
  • Available on request with internal ground fault > 30% of set current

Magnatic Contactors

  • For switching 3 phase motors up to 250 kW
  • Only 7 frame sizes
  • For screw and Din rail mounting
  • Snap on auxiliaries and accessories
  • Ambient temperature up to 60 C
  • Reversing and Star-Dalta assembly kits
  • Size S0-S12 have the top and bottom coil terminals

Hardware

SIMATIC S7-400

The most powerful Automation System within SIMATIC

Superb communication capability and integrated interfaces make the SIMATIC S7-400 process controller ideal for larger tasks such as the coordination of entire systems. The graded range of CPUs enables scalable performance and the capacity for I/O periphery is virtually unlimited. What’s more, process controller signal modules can be inserted and removed while the system is live (hot swapping), making it very easy to expand the system or replace modules.

SIMATIC S7-300

Powerful, compact and cost-effective

The SIMATIC S7-300 universal controller saves on installation space and features a modular design. A wide range of modules can be used to expand the system centrally or to create decentralized structures according to the task at hand, and facilitates a cost-effective stock of spare parts. With its impressive array of innovations, the SIMATIC S7-300 universal controller is an integrated system that will save you additional investment and maintenance costs.

Software

Scada

Our SCADA system offers maximum functionality and a user-friendly user interface. With this configurable and scalable system, you have the advantage of absolute openness to both the office environment and to production. An integrated process database and Plant Intelligence, for example, ensure transparency in production. Numerous options and add-ons extend and expand the scope of performance. Please feel free to check out our client experiences by clicking download button below

ข้อมูลสินค้า